AerGrips 2.0
Low Profile
AerGrips are unique 3D printed flexible TPU shims that sits under the bar tape of your drops. The multifunctional design is ergonomically designed shape to your hands, greatly improve hand contact distribution and wrist stability, and offer 10mm of cushion riding over rough surfaces.
In designing the 2.0 version of the AerGrips, we have researched and developed the concept further to improve hand contact, cushion potential and eliminate possible brake reach issues. We have developed this Low Profile version for riders with small hands or those that want to improve hand comfort while minimising aesthetic impact and cushion potential.
Compatible with all round drop handlebars on gravel, and road bikes.
What’s new for the 2.0 Low Profile AerGrips:
Maintaining much of the original shape, we have made tweaks with substantial positive impact on hand pressure distribution and wrist stability.
Increased primary hand contact area: 7.5mm to 19mmmm. The primary contact area of a standard round handlebar is 7mm.
Reduced cushion potential: 8mm to 6mm, while reducing maximum profile depth from 37mm to 32mm. Using a new TPU material, we’ve achieved reduction in material wall thickness, while also improving lateral stiffness and hand stability.
The new shape also eliminates possible brake reach issues experienced by some riders with the original design, especially in the Low Profile design.
Diagonal rib design reducing potential of material tear and increasing durability.
Pre-order Now for delivery before Christmas.
Before 20th November - Shipping week commencing 7th December
21st to 27th November - Shipping week commencing 14th December
-
It’s unlikely before that you’ve considered why the shapes of drops are a round tube; it’s for one reason only, and that it’s needed to be able to install your levers onto the handlebar. So no consideration has previously been given to how the drops fit into your hands ergonomically, and let me break it to you, your hands don’t grip into a perfectly round shape, especially one that is curved.
The AerGrip concept begins in 2021, with the idea that the nominal round tube shape of the drops aren’t aerodynamic. Avec founder, Tim Allen, knocked up a kammtail grip design and 3D printed them in a TPU material that flexes to the back of the drops. The idea proved effective, not only as an aerodynamic component, but also in reducing wrist torsion when sprinting at a maximum effort, delivering a positive sense of power transfer when pulling across the handlebars, winning in their debut race in an elite criterium and many race wins through to today.
The AerGrips remained a secret weapon, until the development began of the Avec Aer handlebar. The original design did not offer much in the way of comfort, with harsh edges and ridged in its compound, but potentially offered the solution to a wrist clearance issue that resulted in the support mechanisms built into the Aer handlebar. So we revisited the design to learn how we could improve the overall comfort in the grips shape and ergonomically improve contact of the hands with the profile of the drops.
Simple tests with plasticine showed us that when your hands are gripped, the shape formed through your hand is more like an avocado, so we begin be reforming the shape of the grips that shape to the palm of the hands more naturally, distributing contact more evenly and giving a sense of more full contact and increase in hand security while still allowing mobility for your hands to move up and down the drops.
With 3D printing technology, we can be clever about the internal structure of the grips, hollowing out the middle and experimenting with various wall thicknesses that would allow the grip to flex downwards when compressed over harsh, but stable on smooth roads, without losing its shape over time or flexing sideways when under torsion, offering a suspension effect over rough roads. The final design has up to 7mm of travel over the roughest roads/cobbles, vastly improving comfort.
We manufacture our 3D printed parts in the UK, made with a lightweight TPU rubber material, the AerGrips weigh just 30g a set, a minute trade-off for an industry first upgrade for your hand comfort and performance.
-
3D printed TPU
Length: 145mm
Max profile depth: 32mm
Cushion travel: 6mm
Colour: grey
Weight: 26g/set
Compatible with all 23.8mm round drop bar profiles
-
One set of 3D printed TPU AerGrips